About the CTAS-BTMTE Series Stationary Transducers
The CTAS-BTMTE stationary transducers are mounted in a housing that is designed with through holes for mounting to a bench or a mounting plate. There are two standard sizes; one small housing for all transducers up to 250 Lbf/ft and the large housing for transducers up to 2000 Lbf/ft (imperial) or 2711Nm (metric).
Our stationary transducers are supplied with internal square drives; 1/4”, 3/8”, 1/2”, 3/4” and 1” depending on capacity. Various rundown fixtures are available that are designed to fit in the internal square drive providing a means of testing power tools. Transducers are manufactured from stainless steel, precision machined, strain gaged and thoroughly tested in our calibration laboratory for accuracy and repeatability.
Product Features
System accuracy of ±0.5% of indicated reading, top 90% of range.
- Solid machined billet aluminum housing. Designed to facilitate vertical or horizontal tool testing.
- Readily accepts rundown fixtures for testing power tools.
- Our Intellect transducers are “plug and play” with CTAS series instruments.
- Overload 150% of full scale
CTAS-BTMTE Stationary Transducer Series Products
| MODEL | CAPACTIY (imperial) | CAPACITY (metric) | DRIVE SIZE | SIZE W (inches) | SIZE D (inches) | SIZE H (inches) | SIZE W (mm) | SIZE D (mm) | SIZE H (mm) |
|---|---|---|---|---|---|---|---|---|---|
| CTAS-BTMTE-10-O | 1-10 Ozf/in | 0.70-7.06 cNm | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-50-O | 5-50 Ozf/in | 3.53-35.30 cNm | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-100-O | 10-100 Ozf/in | 7.06-70.61 cNm | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-10-I | 1-10 Lbf/in | 11.29-112.98 cNm | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-25-I | 2.5-25 Lbf/in | 28.24-282.46 cNm | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-50-I | 5-50 Lbf/in | 56.49-564.92 cNm | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-100-I | 10-100 Lbf/in | 1-11 | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-250-I | 25-250 Lbf/in | 2-28 | 1/4" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-500-I | 50-500 Lbf/in | 5-56 | 3/8" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-100-F | 10-100 Lbf/in | 13-135 | 1/2" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-150-F | 15-150 Lbf/in | 20-203 | 1/2" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-250-F | 25-250 Lbf/in | 33-338 | 1/2" | 2.925 | 3.125 | 2.25 | 74 | 79 | 57 |
| CTAS-BTMTE-600-F | 60-600 Lbf/in | 81-813 | 3/4" | 4.250 | 4.650 | 2.75 | 107 | 118 | 60 |
| CTAS-BTMTE-750-F | 75-750 Lbf/in | 101-1016 | 3/4" | 4.250 | 4.650 | 2.75 | 107 | 118 | 60 |
| CTAS-BTMTE-1000-F | 100-1000 Lbf/in | 135-1355 | 1" | 4.250 | 4.650 | 2.75 | 107 | 118 | 60 |
| CTAS-BTMTE-2000-F | 200-2000 Lbf/in | 271-2711 | 1" | 4.250 | 4.650 | 2.75 | 107 | 118 | 60 |
Common Accessories, Rundown Fixtures and Cables
| MODEL | DESCRIPTION | DRIVE SIZE | HEX TEST BOLT (imperial) | HEX TEST BOLT (metric) | HEX (inch) | Hex (mm) |
|---|---|---|---|---|---|---|
| CTAS-RD-200-O | 200 Ozf/in or 114cNm rundown fixture | 1/4" | 1/4 x 20 | 6.25 x 508 | 3/16 | 4.76 |
| CTAS-RD-150-I | 150 Ozf/in or 16cNm rundown fixture | 1/4" | 1/4 x 20 | 6.25 x 508 | 3/16 | 4.76 |
| CTAS-RD-500-I | 500 Ozf/in or 56Nm rundown fixture | 3/8" | 3/8 x 16 | 9.52 x 406 | 5/16 | 7.93 |
| CTAS-RD-250F | 250 Ozf/in or 338Nm rundown fixture | 1/2" | 5/8 x 18 | 10.87 x 457 | 1/2 | 12.7 |
| CTAS-CBL-USB | Serial to USB communication cable | |||||
| CTAS-CBL-PIN | Serial to 9 Pin communication cable | |||||
| CTAS-TRANS-CBL | Transducer cable Lemo x Lemo |
Products
Proudly Canadian, we offer a wide range of bolting tools and accessories to suit even the toughest job. From Torque Wrenches, multipliers, and pumps to sockets, flange maintenance and calibration tools. We have what you need.
Services
Are your tools feeling a little wear and tear? Bring them in for a calibration and a little maintenance. We also offer tool rentals but if we don't have what you are looking for ask us about our custom tool engineering where we can design tools for your exact specifications.
Resources
If you need additional product information, specifications, how-to tutorials, and more check out our resources area. If you don't see what you're looking for, send us a message or give us a call and we'll be happy to help you find the information that you need.